CS6510-48S6Q-HI data center 40G switch uses advanced hardware and software architecture design, support built-in modular 1+1 redundant power supplies, 4+1 redundant fans, cross ventilation and wind direction adjustable. It has 48*10GE SFP+ ports and 6*40G QSFP+ ports. CS6510-48S6Q-HI is ideal for cloud computing data center server access and core switch of small to medium datacenter. For campus or other large network, CS6510-48S6Q-HI could also be deployed at aggregation or core layer as its high performance and reliability.
Key Features and Highlights
High Performance and scalability
With high switching capacity, CS6510-48S6Q-HI supports wire-speed L2/L3 forwarding and high routing performance for IPv4 and IPv6 protocols. The 10 Gigabit Ethernet connectivity of CS6510-48S6Q-HI is accomplished via a hot-pluggable 10 Gigabit SFP+ transceiver which supports distance up to 300 meters over multi-mode fiber and 10 to 40km over single-mode fiber (The distance depends the optical module chosen).
CS6510 series support modular 1+1 redundant power supplies and 4+1 redundant fans. Business won’t be interrupted in case replacing power supplies and fans. System supports dual images. Even though the primary image was destroyed, system will still boot via backup image normally.
VSF (Virtual Switch Framework)
As new generation data center switch, CS6510 support VSF which not only guarantees the flexibility, but also enhanced the scalability of datacenter network.
Flex Resource is able to allocate, recover and reallocate hardware resource dynamically according to demand. It can increase the utilization of the hardware resource.
CS6510-48S6Q-HI supports OpenFlow 1.0 standard protocol. OpenFlow network is increasingly becoming a trend as the core protocol of SDN network. It makes the network easier programming OpenFlow brings the high performance to datacenter users via self-defined network. With OpenFlow, this product is ideal to build SDN test-bed for research institutes and SDN Experimental Bureau for large ISP and operator.
Rich L3 Features
CS6510-48S6Q-HI delivers high-performance, hardware-based IP routing.RIP, OSPF and BGP provide dynamic routing by exchanging routing information with other Layer 3 switches and routers. With CS6510-48S6Q-HI, customers could easily achieve Policy based Route (PBR), which is important when they need multi exit application.
CS6510-48S6Q-HI supports MPLS L3 VPN/MPLS L2 VPN(VPLS) and helps customer to construct more secure/extendable network. With max.255 VRF instances, CS6510-48S6Q-HI series could be deployed as P & PE devices, guarantees the variety of services.
Abundant IPv6 Support
CS6510-48S6Q-HI supports IPv6 switching and routing based on hardware for maximum performance. With increased network devices growing and the need for larger addressing and higher security becomes critical, CS6510-48S6Q-HI will be a right product to meet the requirement. CS6510-48S6Q-HI passed IPv6 form Phase II certification, which is the best proof of the application.
CS6510-48S6Q-HI supports abundant multicast features such as IGMPv1/v2/v3 snooping and fast leave and IGMPv1/v2/v3, PIM-DM, PIM-SM, PIM-SSM and even MSDP. With Multicast VLAN Register (MVR), multicast receiver/sender control and illegal multicast source detection functions, CS6510-48S6Q-HI provides great application experience for customer.
|Physical port||48 * 10G SFP+ and 6 * 40G QSFP|
|Management port||Console port RJ4510/100/1000Mbps RJ45 Ethernet Management portUSB2.0 Management port|
96K(standard)/32K(routee)/288K(bridgee), UFT configuration, default is standard
|ARP Table||208k(standard)/16k(routee)/16k(bridgee), UFT configuration, default is standard|
|Routing Table||8k(standard)/128k(routee)/8k(bridgee), UFT configuration, default is standard|
|Relative Humidity||10%~90% non-condensing|
|Temperature||Working 0°C~50°C, storage -40°C~75°C|
|Power Input||AC: 100~240V,50~60 Hz|
|Power Supply||1+1 Modular Redundant|
|L1, L2 Features||
IEEE 802.3(10Base-T), IEEE 802.3u(100Base-TX), IEEE 802.3z(1000BASE-X)
IEEE 802.3ab(1000Base-T), IEEE 802.3ae(10GBase), IEEE802.3x
|12k Jumbo FramePort Loopback DetectLLDP and LLDP-MEDUDLD802.3ad LACP, max 128 group trunks with max 8 ports for each trunkLACP Load Balance|
N:1 Port Mirroring
802.1Q, 4096 VLAN
MAC VLAN, VOICE VLAN, PVLAN, Protocol VLAN, Multicast VLAN
QinQ, Selective QinQ, Flexible QinQ
N:1 VLAN Translation
Broadcast / Multicast / Unicast Storm Control
|IGMP v1/v2/v3 Snooping and L2 QueryND SnoopingMLDv1/v2 Snooping|
|Flow control: HOL, IEEE802.3xBandwidth Control|
|L3 Features||Static Routing, RIPv1/v2, OSPFv2, BGP4OSPFv3, BGP4+OSPF Multiple ProcessLPM RoutingPolicy-based Routing (PBR) for IPv4 and IPv6VRRP
|IGMP v1/v2/v3, IGMP Proxy,DVMRP, PIM-DM, PIM-SM, PIM-SSM, any cast RP, MSDPStatic Multicast RouteMulticast Receive ControlIllegal Multicast Source Detection|
|ARP Guard, Local ARP Proxy, Proxy ARP, ARP Binding, Gratuitous ARP, ARP LimitAnti ARP Cheat, Anti ARP Scan|
|IPv6||6to4 Tunnel, Configured Tunnel, ISATAP Tunnel, GRE TunnelICMPv6, ND, DNSv6IPv6 LPM Routing, IPv6 Policy-Based Routing (PBR)IPv6 VRRPv3, IPv6 URPF, IPv6 RARIPng, OSPFv3, BGP4+MLD Snooping, IPv6 multicast VLAN
MLDv1/v2, PIM-SM/DM for IPv6, IPv6 Anycast RP, IPv6 ACL, IPv6 QOS
|MPLS||MPLS, VRF, LDP|
|MPLS L3 VPN, MPLS L2 VPN(VPLS), VPWS|
|QoS||8 QueuesSWRR, SP, WRR, DWRR, SDWRR, WREDTraffic Classification Based on 802.1p CoS, ToS, DiffServ DSCP, ACL, port numberTraffic ShapingPRI Mark/Remark|
|ACL||IP ACL, MAC ACL, IP-MAC ACLStandard and Expanded ACL Based on source/destination IP or MAC, IP protocol, TCP/UDP port, DSCP, ToS, IP Precedence), VLAN, Tag/Untag, CoSREDIRECT and accounting-based ACLRules can be configured to port, VLANTime ranged ACL|
|Security||802.1x AAAPort, MAC based authenticationAccounting based on time length and trafficGuest VLAN and Auto VLAN|
|RADIUS for IPv4 and IPv6|
|TACACS+ for IPv4 and IPv6|
|DHCPv4/v6||DHCP Server/Client for IPv4/IPv6DHCP Relay/Option 82DHCP Snooping/Option 82|
|Traffic Monitor||sFlow Traffic Analysis|
|Security Network Management||CLI, WEB, Telnet, SNMPv1/v2c/v3 through IPv4 and IPv6Syslog and external Syslog serverHTTP SSLSNMP MIB, SNMP TRAPFTP/TFTPSNTP/NTP
Authentication by radius
Dual firmware images/ Configuration files
802.3ah OAM, 802.1ag OAM
OpenFlow 1.0 (support open controller Opendaylight, Floodlight, Ryu, Pox, etc.)
|Data Center Features||
IEEE VEPA (Virtual Ethernet Port Aggregator) *
VSF (Virtual Switch Framework)
The contents marked with “*” need future upgrade or are under development
Date Center Applications
CS6510-48S6Q-HI switch work as TOR switches and connect to the core using 100GE ports.
|CS6510-48S6Q-HI||40G Advance Enhanced Datacenter Switch (48*10GbE (SFP+) +6*40GbE (QSFP+)), redundant and modular design, high performance. Full L3 features, Default with two hot-swap AC power supply, Default with 5 (4+1) fans, Broadcom chipset|