DCN CS6200-EI copper series switches are next-generation 10G stackable routing switches that provide fixed gigabit access and 10GE uplink ports. CS6200-EI copper switch has advanced hardware and software architecture design. These switches provide high availability, scalability, security, energy efficiency, and ease of operation with rich features such as VSF (Virtual Switch Framework), IEEE 802.3at optional and redundant power supplies. It is ideal for high-density aggregation or core layer in campus networks or SMB networks.
Key Features and Highlights
Performance and Scalability
With high switching capacity, CS6200-EI copper series support wire-speed L2/L3 forwarding and high routing performance for IPv4 and IPv6 protocols.
The 10 Gigabit Ethernet connectivity of CS6200-EI copper is accomplished via a hot-pluggable 10 Gigabit SFP+ transceiver which supports distance up to 300 meters over multimode fiber and 10 to 40km over single-mode fiber (The distance depends on the optical module chosen).
VSF (Virtual Switch Framework)
Virtual Switch Framework can virtualize multiple DCN switches into one logical device, achieving the sharing of information and data tables between different switches. The performance and ports density of the virtualized device is greatly enlarged by times under VSF. VSF also simplifies management work for the network administrator and provides more reliability.
Rich L3 Features
CS6200-EI copper series delivers high-performance, hardware-based IP routing. RIP, OSPF, and BGP provide dynamic routing by exchanging routing information with other Layer 3 switches and routers. With the CS6200-EI copper series, customers could easily achieve a Policy-based Route (PBR), which is important when they need a multi exit application.
Strong Multicast
CS6200-EI copper series supports abundant multicast features. In Layer 2, such as IGMPv1/v2/v3 snooping and fast leave. L3 multicast protocols such as IGMPv1/v2/v3, PIM-DM, PIM-SM, PIM-SSM, and even MSDP. With Multicast VLAN Register (MVR), multicast receiver/sender control and illegal multicast source detect functions; the CS6200-EI copper series provides a great application experience for the customer.
Easy High-Reliability network
MRPP is a Multi-layer Ring Protection Protocol, which is DCN’s private fast Ethernet ring protocol. Comparing to spanning tree protocol, it has the advantages of fast convergence, simple protocol calculation, fewer system resources cost, and so on, which can improve the reliability of Ethernet network operation.
Comprehensive QoS
With 8 queues per port, the CS6200-EI copper series enable differentiated management of up to 8 traffic types. The traffic is prioritized according to IEEE802.1p, DSCP, IP precedence, and TCP/UDP port number, giving optimal performance to real-time applications such as voice and video.
CS6200-EI copper series also supports Bi-directional rate-limiting, per port or traffic class preserves network bandwidth, and allows full control of network resources.
Enhanced Security
IEEE 802.1X port-based access control and MAC-based access control ensure all users are authorized before being granted access to the network.
Ingress/Egress Access Control Lists (ACLs) can be used to restrict access to sensitive network resources by denying packets based on L2/L3/L4 headers information. And for some services that are based on time, the product can support time-based ACL to match the requirement.
Secure Shell (SSH) encrypts network management information via Telnet providing secure network management.
RADIUS Authentication enables centralized control of the switch and restricts unauthorized users from altering the configuration of the switch..
Specifications
Item |
CS6200-28X-EI(R2) |
CS6200-28X-P-EI(R2) |
CS6200-52X-EI |
Performance |
|||
Switching Capacity |
128Gbps |
128Gbps |
176Gbps |
Forwarding Rate |
95Mpps |
95Mpps |
131Mpps |
Jumbo Frame |
10K |
10K | 10K |
MAC Address |
16K |
16K |
16K |
ARP Table |
4K |
4K |
4K |
Routing Table |
13K |
13K |
13K |
ACL Table |
3K |
3K |
3K |
L3 Interface |
Max 1K |
Max 1K |
Max 1K |
Physical |
|||
Dimension (W*H*D) | 440mm x 44mm x 320mm | 440mm x 44mm x 320mm | 440mm x 44mm x 320mm |
Management port | 1 x RJ45 Ethernet Management port | ||
1x Console port |
|||
1x USB2.0 interface |
|||
Relative Humidity | 5%~95% non-condensing | ||
Temperature | Working 0°C~50°C, storage -40°C~70°C | ||
Power Supply | Dual AC:100~240VAC, 50~60Hz | AC:100~240VAC, 50~60Hz | Dual AC: 100~240VAC, 50~60Hz |
Power Consumption | <30W | <440W | <50W |
PoE | NA |
IEEE 802.3af/a IEEE 802.3at Total PoE power: 375W |
NA |
Main Features |
|||
L1, L2 Features |
IEEE802.3(10Base-T), IEEE802.3u(100Base-TX), IEEE802.3z(1000BASE-X), IEEE802.3ab(1000Base-T), IEEE802.3ae(10GBase), IEEE802.3x, IEEE802.3ak(10GBASE-CX4), Auto MDI/MDIX |
||
Port loopback detectionLLDP and LLDP-MEDUDLD
802.3ad LACP, max 128 group trunks with max 8 ports for each trunk LACP load balance |
|||
N:1 Port Mirroring RSPAN |
|||
IEEEE802.1d(STP) IEEEE802.1w(RSTP) IEEEE802.1s(MSTP) Root Guard BPDU Guard BPDU Tunnel |
|||
802.1Q, 4K VLAN MAC VLAN, Voice VLAN, PVLAN, Protocol VLAN, Multicast VLAN QinQ, Flexible QinQ GVRP N:1 VLAN Translation Broadcast / Multicast / Unicast Storm Control |
|||
IGMP v1/v2/v3 Snooping and L2 Query, IGMP Proxy,ND Snooping
MLDv1/v2 Snooping |
|||
Port Security |
|||
Flow Control: HOL, IEEE802.3xBandwidth Control | |||
L3 Features | Static Routing, RIPv1/v2, OSPFv2, BGP4OSPFv3, BGP4+OSPF multiple processes
LPM Routing Policy-based routing (PBR) for IPv4 and IPv6 VRRP URPF, ECMP BFD |
||
DVMRP, PIM-DM, PIM-SM, PIM-SSM, Anycast RP, MSDPStatic Multicast RouteMulticast Receive Control
Illegal Multicast Source Detect |
|||
ARP Guard, Local ARP proxy, Proxy ARP, ARP Binding, Gratuitous ARP, ARP LimitAnti ARP Cheat, Anti ARP Scan | |||
DNS Client, DNS Relay | |||
GRE Tunnel | |||
IPv6 | 6 to 4 Tunnel, Configured Tunnel, ISATAP Tunnel, GRE TunnelICMPv6, ND, DNSv6IPv6 LPM Routing, IPv6 Policy-based Routing (PBR)
IPv6 VRRPv3, IPv6 URPF, IPv6 RA RIPng, OSPFv3, BGP4+ MLD Snooping, IPv6 Multicast VLAN MLDv1/v2, PIM-SM/DM for IPv6, IPv6 Anycast RP, IPv6 ACL, IPv6 QoS |
||
QoS | 8 Queues SP, WDRR, SWDRRTraffic Classification Based on 802.1p COS, ToS, DiffServ DSCP, ACL, port numberTraffic Policing
PRI Mark/Remark |
||
ACL | IP ACL, MAC ACL, IP-MAC ACLStandard and Expanded ACL Based on source/destination IP or MAC, IP Protocol, TCP/UDP port, DSCP, ToS, IP Precedence), VLAN, Tag/Untag, CoSRedirect and Statistics
Rules can be configured to port, VLAN Time Ranged ACL |
||
Security | 802.1x AAAPort, MAC-based authenticationAccounting based on time length and traffic
Guest VLAN and auto VLAN |
||
RADIUS for IPv4 and IPv6 | |||
TACACS+ for IPv4 and IPv6 | |||
MAB | |||
DHCPv4/v6Traffic Monitor | DHCP Server/Client for IPv4/IPv6DHCP Relay/Option 82DHCP Snooping/Option 82 | ||
Traffic Monitor | sFlow Traffic Analysis | ||
Security Network Management | CLI, WEB, Telnet, SNMPv1/v2c/v3 through IPv4 and IPv6Syslog and external Syslog ServerHTTP SSL
SNMP MIB, SNMP TRAP, RMOM 1,2,3,9 FTP/TFTP SNTP/NTP Authentication by Radius/TACACS SSH v1/v2 Dual firmware images/ Configuration files 802.3ah OAM, 802.1ag OAM |
||
Data Center Features | VSF (Virtual Switch Framework) |
Application
Deployed as aggregation switches that provide gigabit downlink and 10G uplink in a campus or enterprise network. Order Information
Product |
Description |
CS6200-28X-EI(R2) |
10G Ethernet Routing Switch, 20 x 10/100/1000BaseT + 4 x GE Combo (GT/SFP) + 4 x 10GE(SFP+), dual AC redundancy power supply. |
CS6200-28X-P-EI(R2) |
10G PoE Ethernet Routing Switch, 20 x 10/100/1000BaseT + 4 x GE Combo (GT/SFP) + 4 x 10GE(SFP+), One Fixed AC power supply. up to 375W for PoE |
CS6200-52X-EI |
10G Ethernet Routing Switch, 48 x 10/100/1000BaseT + 4 x 10GE(SFP+), dual AC redundancy power supply.) |